Please read and comply with Function Environmental protection these original instructions prior to the initial operation of your appliance and The scrubber vacuum is used for wet The packaging materials are re- store them for later use or subsequent own- cleaning or polishing of level floors.
Operating elements 1 Lock for fresh water reservoir Before Commissioning 2 Switch for brush drive 3 Switch for detergent solution Installing the pushing handle 4 Hose for detergent solution 5 Lint sieve (suction) 6 Lock of pushing handle 7 Release button for the transport wheel 8 Transport wheel * 9 Push handle 10 Strain relief clamp...
Page 4
If the detergent solution is to be vacu- Note Note umed off after the cleaning process: Do not use highly foaming detergents. Ob- Carry out the initial cleaning attempts with Check that all vacuum bars are inserted serve the dosing notes. less contact pressure.
Let the reservoirs dry prior to closing Emptying the Dirt Water Reservoir Frost protection them to prevent odor creation. In case of danger of frost: Note Clean the outside of the appliance with Empty the fresh and dirt water reservoirs. a damp cloth which has been soaked in If the dirt water reservoir is full the float Push the button for detergent solution...
Fault Remedy Appliance cannot be started Check if the mains plug is connected. Socket fuse rating too low, look for proper socket. Insufficient water quantity Check fresh water level, refill tank if necessary. Clean the ball valve in the fresh water reservoir. Check and ensure that the fresh water reservoir is seated properly on the appliance.
Need help?
Do you have a question about the BR 40/10 C Adv and is the answer not in the manual?
Questions and answers