Omron sysmac EtherNet/IP NJ Series Connection Manual page 20

7.2.2. Parameter Settings
Set the IP address of the Driver.
The IP address is set using the MEXE02. Install the MEXE02 and USB driver on your personal
computer before proceeding.
Additional Information
For information on how to install the MEXE02 and USB driver, refer to the website of
ORIENTAL MOTOR CO., LTD.
1
Connect Driver and Personal
computer with a USB cable.
2
Start MEXE02.
3
Turn ON Control power supply
for Driver.
*Do not turn ON Main power
supply for Driver.
4
Click Select a product
displayed in the middle of the
MEXE02 window.
5
The (a2) Select Product Tab
Page is displayed on the left
side of the MEXE02 window.
Driver connected to Personal
computer is displayed under
Products being connected to
PC.
Click (New).
7．EtherNet/IP Connection Procedure
Personal
computer
USB cable
Driver
17