Omron sysmac EtherNet/IP NJ Series Connection Manual page 24

5
The Project Properties Dialog
Box is displayed. Select items
appropriate for your Controller
from the pull-down list in each
field of Select Device.
Click Create.
The following Controller is used
in this guide.
・Category: Controller
・Device: NX102-1200
・Version: 1.31
*In this guide, "New Project" is
used as the project name.
6
The New Project is displayed.
The following panes are
displayed in the window.
Left: Multiview Explorer
Upper right: Toolbox
Lower right: Controller Status Pane
Upper middle: Edit Pane
The following tabs are displayed
in the lower middle of the
window.
Output Tab Page
Build Tab Page
7
Double-click Built-in
EtherNet/IP Port Settings
under Configurations and
Setup – Controller Setup in
the Multiview Explorer.
7．EtherNet/IP Connection Procedure
Multiview
Edit Pane
Explorer
Output Tab
Build Tab
Page
Page
Toolbox
Controller
Status
Pane
21