Processor And Heatsink Installation; Installing The Lga 1700 Processor - Supermicro SuperServer SYS-511R-W User Manual

3.3 Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct pressure on the label
area of the fan.
Important:
•
Use ESD protection.
•
Unplug the AC power cord from all power supplies after shutting down the system.
•
Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
•
When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or CPU socket, which may require manufacturer repairs.
•
When installing the processor and heatsink, ensure a torque driver set to the correct force
is used for each screw.
•
If you buy a CPU separately, make sure that you use an Intel-certified multi-directional
heatsink only.
•
Refer to the Supermicro website for updates on processor support.
•
All graphics in this manual are for illustrational purposes only. Your components may look
different.

Installing the LGA 1700 Processor

1. Remove the plastic protective cover from the load plate.
Plastic
protective cover
Load Lever
Chapter 3: Maintenance and Component Installation
30
Load Plate