Installing The Chassis Into The Rack - Supermicro SuperServer SYS-511R-W User Manual

2.5 Installing the Chassis into the Rack

Once rails are attached to the chassis and the rack, the chassis is ready to be installed into
a rack.
1. Push the inner slides, which are attached to the chassis, into the grooves of the outer
slide assemblies that are installed in the rack as shown below.
2. Slide the chassis rails into the rack rails until the chassis is completely in the rack.
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Grooves of the outer rail assemblies
Inner rails
26
Chapter 2: Server Installation