Quantum DXi4700 Upgrade Manual page 40

Quantum DXi4700 Capacity Upgrade Guide
6-68107-03 Rev C
December 2016
40
2 On the License Key Management Web site, perform the following steps:
a Enter the system serial number in the Serial Number box and click
Submit.
b Enter the authorization code (printed on the License Certificate) and
click Get License Key.
The Licensed Feature page returns a storage capacity key.
3 Switch to the Utilities > License Keys page in the DXi remote management
console (see Figure 38).
4 Enter the license key in the New Key box and click Add.
The file system is automatically expanded. (This can take up to 10 minutes.)
5 Click the Storage Capacity license link on the License Keys page. The
maximum allowed storage capacity appears under License Details (see
Figure 40).
Verify that the licensed capacity equals the expected total storage capacity
of the system.
Note: After installation, the DXi4700 performs background initialization of all
new storage arrays. This process takes several days. You can use the
DXi4700 normally during this time. To monitor the progress of
background initialization, navigate to Status > Hardware > Details >
Storage Arrays in the remote management console. Click a storage
array, and then click Volumes to view initialization status.
Installing the Storage Capacity License