Quantum DXi4700 Upgrade Manual page 31

Figure 28 DXi4700 Expansion
Module Installation
Front of Expansion module
Installing Expansion Modules
Follow these steps to install the DXi4700 Expansion module:
1 Align the Expansion module with the rails, and then slide the Expansion
module into the rack (see
2 Tighten the thumbscrews on each side of the Expansion module's front
panel.
Note: To remove the Expansion module, loosen the thumbscrews and slide
the Expansion module out of the rack.
Thumbscrew
Quantum DXi4700 Capacity Upgrade Guide
Figure 28).
6-68107-03 Rev C
December 2016
Rails
31