Quantum DXi4700 Upgrade Manual page 38

Quantum DXi4700 Capacity Upgrade Guide
6-68107-03 Rev C
December 2016
Figure 36 Expansion Module
Power Switches
Figure 37 Node Power Button
Installing the Storage Capacity License
38
b Press the power button on the front of the Node (see
for the system to boot before continuing with the procedure. (This can
take up to 30 minutes.)
Note: The system may reboot one or more times depending on the
components that were installed. If all components are properly
installed and cabled, the LEDs on all hard drives in the Node and the
Expansion modules will be lit. (The top LED will be solid and the
bottom LED will blink.)
System Node (Front)
Power Button
Before the newly installed hardware capacity can be used to store data, you
must add a license key to enable the new usable capacity of the system. The
6TB, 8TB, and 18TB licenses each need to be installed separately.
Locate the Storage Capacity License Certificate that was included with the
upgrade components, and then complete the following procedure:
1 Open two Web browser windows on a computer with Internet access.
Note: During this procedure, you can copy and paste required numbers
between these two windows.
Expansion module
Power switches
Installing the Storage Capacity License
Figure 37). Wait