Table of Contents
Advertisement
18
Chapter 1 About This Machine
Control panel
■ Main control panel
1 Check & error display
Shows the status of this machine and the location
where an error is occurring.
2 [ I ] indicator
The color of the [ I ] indicator shows the status of this
machine.
3 Numeric keys
Press these keys to enter the number of prints and
the values for various settings.
4 Numeric display
Shows the number of prints and the entered values
for various settings.
5 [P] key
(A
40)
Press this key to use the [Program]. When [Program]
is turned on, the key lamp is lit.
6 [X] key
Press this key to operate [Program]
tom Setting Mode]
7 [AUTO PROCESS] key
Press this key to turn on / off [AUTO PROCESS].
When [AUTO PROCESS] is turned on, the lamp
above the key is lit.
8 [MASTER MAKING/PRINT] key
Press this key to switch the master making process
and printing process.
9 [PROOF] key
Press this key to output a proof copy.
0 [RESET] key
Press this key to reset the current setting to its
default value or clear error displays after trouble-
shooting.
a [+] key
Press this key to operate [Program]
tom Setting Mode]
1
b
(A
64)
(A
64)
(A
40) or [Cus-
(A
46).
(A
20)
(A
25)
(A
25)
(A
40) or [Cus-
(A
46).
2
3
4
5 6
c
d e
f
b [SPEED] key
Press this key to adjust the print speed. The indicator
above the key shows the current speed.
c [PRINT POSITION] keys
Press these keys to adjust the print position in the
horizontal direction after master making.
d [U] key
Press this key to register the [Program]
tings.
e [C] key
Press this key to clear the entered characters and
numbers.
f [START/WAKE-UP] key
In this guide, this key is called the [START] key.
• Press this key to start the master making process
and the printing process as well as to start various
operations.
• The key lamp is lit when the operation is available
and not lit when the operation is not available.
• When this machine is in sleep (power saving) sta-
tus, only this key lamp is lit and all other lamps are
off. Press this key to activate this machine.
g [STOP] key
Press this key to stop the operation in progress.
If this key is pressed while master making is in prog-
ress, the operation stops after the master making
process is complete.
7
8
9
0
a
g
(A
36)
(A
37)
(A
40) set-
Advertisement
Table of Contents
Troubleshooting
