Control Panel - Riso CZ180 User Manual

Before Starting to Use

Control Panel

1)
Check & Error Display ( p.68)
Indicates error locations and status.
2)
Indicator ( p.68)
3)
Print Quantity Keys (0 to 9 Keys)
Use to enter the number of pages to be printed or to
enter other numeric values.
4)
Print Quantity Display (Error number display)
Shows the number of printed pages, numeric values
entered for various settings, and error numbers.
5)
P Key/Indicator ( p.42)
Use to set up and retrieve programs.
(programed printing)
When activated, the indicator above the key lights.
6)
Key
Use when setting up for programed printing.
7)
Auto-Process Key/Indicator ( p.35)
Performs non-stop operation from master-making
through printing.
When activated, the indicator above the key lights.
8)
Master-Making/Print Change over Key/Indicator
Changes over the machine operation between Master-
Making and Print modes. Usually, an appropriate mode
is selected automatically according to your operation
(such as loading of an original) and the selected mode
indicator lights up.
9)
Proof Key ( p.36)
Use when you want to check print result after adjusting
the print position, for example.
This allows you to print sample copies without affecting
the value on Print Quantity Display.
10)
Reset Key
Returns all settings to the initial settings.
11)
Key
Use when setting up for programed printing or when
changing the initial settings.
16
Control Panel
12)
Print Speed Adjustment Key/Indicator ( p.38)
Selects the print speed from three levels.
The indicator above the key shows the current speed
level.
13)
Vertical Print Position Adjustment Keys/
Indicator ( p.37)
Adjusts the print position in vertical direction (within 10
mm ( / ")) after making a master.
3
8
The indicator above the keys shows the offset amount
from the center.
To clear the offset amount, press
14)
Key
Use to perform programed printing or to display the error
number if an error occurred.
15)
C Key
Cancels entered numeric values or resets the counter to
zero.
16)
Start Key/Indicator
Starts master-making or printing process, or executes
specified operations.
The key is lighted only when the key is active.
17)
Stop Key
Stops operation in progress.
.