Collecting And Disposing Of Depleted Consumables; Ink Cartridge; Master Core; Used Master - Riso CV1200W User Manual

Collecting and Disposing of
Depleted Consumables

Ink cartridge

• Dispose of the depleted ink cartridges according to
the disposal regulations of your local community. If
required, separate the specific components using
the following procedures as a reference.
Parts Materials
Ink cartridge and Plastic (polypropylene or polyeth-
cap ylene)
Label Plastic (metal included)
Ink Petroleum carbon hybrid, water,
and pigment
• Remove the label at the edge of the ink cartridge by
peeling it off from the section indicated with the
arrow in the illustration below, and then dispose of it
separately.
Caution
Ink may be left on the area around the edge of the
ink cartridge. Take care not to smudge your hands
or clothes with the ink. Wash immediately with soap
if you get ink on your hands, etc.
Chapter 7 Replacing Consumables

Master core

• Dispose of the depleted master core according to
the disposal regulations of your local community. If
required, separate the specific components using
the following procedures as a reference.
Parts Materials
Core Paper
Master roll Plastic, Japanese paper
Plastic cap Plastic (polypropylene)
Label Plastic (metal included)
• A metallic component has been attached to the bot-
tom of the end section with the [ I ] mark stamped.
Remove the plastic cap from the master core, and
peel off the metallic component from the rear surface
of the cap.

Used master

• Dispose of the used masters according to the dis-
posal regulations of your local community. If
required, separate the specific components using
the following procedures as a reference.
Parts Materials
Master roll Plastic, Japanese paper
Ink Petroleum carbon hybrid, water,
and pigment
BThe master is made of carbon and hydro-
gen compounds. If it is fully combusted, it
will turn into water and carbon dioxide.
57
7