Daikin VRV Aurora RXLQ-TATJU Series Service Manual page 174

Field Settings for Indoor Unit
1.4.36 Individual Ventilation Setting
This is set to perform individual operation of Energy recovery ventilator using the remote
controller/central unit when Energy recovery ventilator is built in.
(Switch only when Energy recovery ventilator is built in.)
Mode
15 (25)
1.4.37 Display of Error Codes on the Remote Controller
For BRC1E73 only
Error code (four digits) is displayed for limited products. Select two-digit display if four-digit display
is not preferred.
Mode
1.4.38 Room Temperature Display
For BRC1E73 only
It is possible to change whether or not the room temperature is displayed for the detailed display
screen.
Mode
1.4.39 Thermistor Sensor for Auto Changeover and Setback Control by the
Remote Controller
For BRC1E73 only
Select a thermistor to utilize for the cool/heat mode automatic changeover and setback functions.
The sensed temperature will be displayed on the remote controller as the room temperature.
Mode
167
First Code Second Code
No. No. No.
01
5
02
First Code Second Code
No. No. No.
01
02
1b 4
03
04
First Code Second Code
No. No. No.
01
1c 0
02
First Code Second Code
No. No. No.
01
1c 1
02
Contents
Normal
Individual
Contents
—
Two-digit display
—
Four-digit display
Contents
Not displayed.
Displayed.
Contents
Utilize the return air thermistor
Utilize the remote controller thermistor
Part 5 Field Settings and Test Operation
SiUS341802EC
: Factory setting
: Factory setting
: Factory setting
: Factory setting