Removing And Installing The Battery; Central Processor Unit (Cpu) - Emerson FloBoss 107 Instruction Manual

2.5.1 Removing and Installing the Battery

Memory backup
2.6

Central Processor Unit (CPU)

Issued Fed-07
To remove the battery on the backplane:
1. Remove power from the FB107.
Figure 2-5. Memory Backup Cap
2. Slide the Memory Backup cover to the left.
3. Remove the battery by gently prying the battery from its terminals.
Replace the battery by placing the battery positive-side up and
4.
gently pressing it into place.
Slide the Memory Backup cover back over the battery.
5.
Restore power to the FB107.
6.
Note: The super-cap is not field-replaceable.
The FB107 base unit has four slots. Slot 0 is reserved for the CPU
module. The CPU provides connections to the field wiring and surge
and static discharge protection for the field wiring. Electronics include
the RTD, comms, and power.
Installation and Use
FloBoss 107 Instruction Manual
2-13