Table of Contents
Advertisement
QubiQ S1500
Restarting the Device after Running the Tank empty
When running a tank completely empty, the pump will automatically stop fogging to prevent damage to
the pump. The display will show:
If you refill the tank and try to operate the device, the display will keep displaying this Warning
message.
Make sure you fill the entire tank, let the device reheat and then manually start fogging.
This will take a few seconds until the completely emptied lines are filled with fog fluid.
Control Modes
The QubiQ S1500 supports the following control modes:
●
Manual (fog intensity, duration, timer)
●
Manual via Remote control (fog intensity, duration, timer)
●
1 DMX channel
For more information about how to connect the devices, refer to 5. Setup on pages 18–20.
Product code: 61061
28
Advertisement
Table of Contents
