Table of Contents
Advertisement
HOW TO CHANGE BALL RELEASE MOTOR
Unlock the lock on the right lane cover of the alley
using a H95 Key.
Slide yellow lane cover up and remove from alley.
Remove the balls in the track.
Slide up both wood blocks holding the sensors.
Unplug the connectors, and remove the
sensors from the cabinet.
Remove the 4 mounting screws using a #2
Square Bit screwdriver.
Remove the white plastic ball track from cabi-
net.
Remove the small cotter pin from the motor shaft,
and remove the black plastic wheel.
Remove roll pin and save for
re-installation of
new motor.
Remove the 4 bolts attaching the
motor bracket to the wood
cabinet using a 7/16" wrench.
37
Advertisement
Table of Contents
