Table of Contents
Advertisement
HOW TO ACCESS TARGET SENSORS
Remove the 4 bolts (A5SCBH027) from the
front metal cage using a 5/32" Allen Wrench.
Remove the 2 screws in the left and right rubber ends
using a Phillips screwdriver
Pivot and pull the playfield to the left to access the
cables on the lower left corner.
Unplug the game harness cables from the right side of
the jumper board to free the playfield from the cabinet.
The playfield can now be removed from the game, and
sensor boards can be replaced.
For installation: position playfield into cabinet and plug
cables into the right side of jumper board as shown.
36
18025
18024
18023
18022
18021
18020
18019
Advertisement
Table of Contents
