Table of Contents
Advertisement
ERROR CODES
ROLL BALLS MESSAGE
The game thinks there are balls in the ball track waiting to be rolled.
This will disable the motor from releasing more balls.
Remove right side lane cover and check the overflow sensor in ball
track. Clean or replace if needed.
Part # AACB3850A
Overflow
Sensor
RED DOT ON LOWER LEFT CORNER OF DISPLAY
The game thinks there are no tickets in the
ticket tray.
Check the low ticket
switch in the left front
side of game.
Replace switch if using tickets. Part # AASW200
Unplug one of the wires if using not using tickets.
(Card Swipe systems)
GREEN DOT ON LOWER RIGHT CORNER OF DISPLAY
The game thinks there are too many balls in the ball track.
This will result in the game miss-scoring or
giving 0 points for the first few balls rolled.
Most of the time, one alley will be missing balls
while this alley has extra balls.
To balance the balls in each alley:
Open the middle lower door to access the menu
buttons and hold the "Menu Select" button to en-
gage ball release motor.
Ball Count
Sensor
If the correct number of balls (9) are in the track, remove right side
lane cover and check the ball count sensor at the far end of the ball
track.
Clean or replace if needed. Part # AACB3850A
23
Advertisement
Table of Contents
