Infineon AIROC CYW20829 User Manual page 20

AIROC™ CYW20829: CYW920829B0M2P4XXI100-EVK Module
Evaluation Kit user guide
Kit operation
Jumper J10 pin configurations
Table 3
Jumper J10 Default state
(VIO_BASE
selection)
1 and 3 Shorted
3 and 5 Open
3 and 4 Open
Jumper J12 pin configurations
Table 4
Jumper J12 Default state
(VDDPA
selection)
1 and 2 Shorted
2 and 3 Open
Jumper J14 pin configuration
Table 5
Jumper J14 Default state
(Thermistor
connect/
disconnect)
1 and 2 Shorted
User guide
Connection on Description
CYW20829
VDDIO Short these pins to supply 3.3 V to VIO_BASE of
the CYW20829 device, as well as all peripherals
and sensors
Short these pins to supply 1.8 V to VIO_BASE of
the CYW20829 device, as well as all peripherals
and sensors
Short these pins to supply VIO_BASE of the
CYW20829 device, as well as all peripherals and
sensors from the coin cell supply (VCOIN)
Connection on Description
CYW20829
VDDPA Short these pins to supply 3.3 V to VDDPA of the
CYW20829 device. Also, use this jumper to
measure the current consumption of VDDPA
when using a 3.3 V supply.
Short these pins to supply VCOIN to VDDPA of
the CYW20829 device. In addition, use this
jumper to measure the current consumption of
VDDPA when using the coin cell supply (VCOIN).
Connection on Description
CYW20829
P3.4 Short this jumper to connect the onboard
thermistor to CYW20829. If user need to isolate
Thermistor to use P3.4 as Analog IO. This jumper
to be kept open.
20 002-39356 Rev. **
2024-02-07