Imu Interrupt Signal Selection - Infineon AIROC CYW20829 User Manual

AIROC™ CYW20829: CYW920829B0M2P4XXI100-EVK Module
Evaluation Kit user guide
Kit rework
Figure 40 I2S interface selection
5.5

IMU interrupt signal selection

On the kit, the default connection is made for the RGB LED interface. To use the IMU INT1 signal, remove R117
and install R48 to use the CS and INT1 pin of the IMU.
Figure 41 IMU INT1 interface selection
User guide 48 002-39356 Rev. **
2024-02-07