Device Reset - Infineon AIROC CYW20829 User Manual
Evk module evaluation kit
Hide thumbs
Also See for AIROC CYW20829:
- Manual (19 pages) ,
- Quick start manual (4 pages) ,
- Manual (18 pages)
Table of Contents
Advertisement
AIROC™ CYW20829: CYW920829B0M2P4XXI100-EVK Module
Evaluation Kit user guide
Hardware
Figure 22
Jumper J12 for VDDPA selection
Figure 23
Jumper J17 for VDDPA selection
3.2.3
Device reset
The reset circuit on the board consists of a reset button (SW1) connected to the ground with an optional pull-up
resistor and decoupling capacitor. Release the BT_RST_N on CYW20829 with the delay of 50 ms or more after
the VDDIO supply voltage is stabilized. The voltage-detector IC is used to provide this delay.
Figure 24
Reset button circuit in baseboard
User guide
33
002-39356 Rev. **
2024-02-07
Advertisement
Table of Contents
