Ruijie Reyee RG-NIS3100 Series Hardware Installation And Reference Manual page 8

RG-NIS3100 Series Switches Hardware Installation and Reference Guide
Caution
●
In a domestic environment, this product may cause radio interference in which case the user may be
required to take adequate measures.
●
To ensure minimal radio interference and the compatibility with various power module models, it is
necessary to use a power cord (less than 3 meters) with a magnetic ring larger than 7 Ohm at the input end
of the device. This ensures electromagnetic compatibility and proper functioning of the device. Moreover, you
are advised to use shielded twisted pair (STP) cables for Ethernet port connections.
Danger
This device is not suitable for use in locations where children are likely to be present.
1.3.2 Appearance
The RG-NIS3100-8GT4SFP-HP full GE switch provides eight 10/100/1000BASE-T RJ45 ports with
auto-negotiation and four SFP ports on the front panel, and DC power inlets on the top panel. The following
figures show the product appearance.
Figure 1-1 RG-NIS3100-8GT4SFP-HP
4
Product Introduction