Baroness LM18GC Owner's Operating Manual page 80

LM18GC・LM56GC / LM66TC
Repair
Adjustment of Clutch Spring
The factory default setting of the clutch
spring total length is 63.0 mm (2.48 in).
The longer the spring is set, the lighter
clutch handling is provided. The shorter, the
heavier.
1. Make adjustment with the spring
adjustment nut so that the total length of
the clutch spring will be 63.0 mm (2.48
in) when the main clutch lever set to the
"ON" position.
2. Loosen the lock nut and adjust the clutch
spring total length with the spring
adjustment nut.
3. Confirm that there is no engine clutch
slipping when the main clutch lever set to
the "ON" position.
4. Tighten the lock nut.
3
Adjustment of Clutch Spring_001
1
2
3
A
Page 7-4
1
A
2
wdzf6u-004
Clutch spring
Spring adjustment nut
Lock nut
63.0 mm (2.48 in)
Adjustment and Replacement