Baroness LM18GC Owner's Operating Manual page 35

Issue 2:
The cutting height is uneven due to the up-
and-down movements of the cutting section
caused by the operator's handle movements.
Solution:
The grass catcher and handle are linked,
eliminating as much as possible the transfer
of rough handle movements causing
changes in the cutting section attitude.
By adjusting the link rods, the handle can
remain centered in the handle adjuster, and
uniform cutting section contact pressure
can be achieved.
3 1 5
IGCA (Independent Grass Catcher Arm)_003
1 IGCA
2 Cutting section
3 Grass catcher
4 Handle
5 Link rod
6 Handle adjuster
Effect 1:
Regardless of skill level, any operator can
mow at a uniform cutting height, as long as
the handle can be adjusted within the range of
the hole in the handle adjuster.
This is effective when accelerating very
quickly or mowing undulations.
3
IGCA (Independent Grass Catcher Arm)_004
IGCA (Independent Grass Catcher Arm)
4
4
6
2
4fx8ud-003
1
4fx8ud-004
Description of Functions
Effect 2:
Since the load of the grass catcher does not
affect the front roller, it is possible to reduce
sinking (gouging or digging) caused by the
front roller touching the ground when entering
the green.
3
IGCA (Independent Grass Catcher Arm)_005
2
LM18GC・LM56GC / LM66TC
1 IGCA
2 Cutting section
3 Grass catcher
1
4
1 IGCA
2 Cutting section
3 Grass catcher
4 Front roller
2
4fx8ud-005
Page 4-7