Baroness LM18GC Owner's Operating Manual page 49

Installation of traveling tires:
Follow below steps to install the traveling
tire.
1. Set the machine on its stand.
Important
The drum shaft and traveling tire have
depressions and projections that fit together.
Match the shapes during installation.
A
Removing/Installing Traveling Tires_004
1 Traveling tires
2 Drum shaft
Depressions and projections that fit
A
together
2. Install the traveling tire to the drum shaft.
Important
Make sure that the wheel mounting plate fits
into the groove in the drum shaft.
If they do not engage, the wheel may fall off.
1
Removing/Installing Traveling Tires_005
1 Traveling tires
2 Wheel mounting plate
A Groove
Cutting Work
Removing/Installing Grass Catcher
A
2
1
x9pzjh-004
A
2
x9pzjh-005
LM18GC・LM56GC / LM66TC
Handling Instructions
Caution
Stop the engine before removing / installing
the grass catcher.
Removing Grass Catcher:
Lift up the grass catcher to detach the right &
left latches of it from the roller brackets.
Installing Grass Catcher:
Attach the right & left latches of the grass
catcher to the roller brackets.
3
Removing/Installing Grass Catcher_001
1 Basket
2 Latch
3 Roller bracket
2 1
bos35l-001
Page 5-13