Table of Contents
Advertisement
ACT Fresnel 50 RGBAL incl. barndoor
Barndoor Installation
The ACT Fresnel 50 RGBAL is delivered with a barndoor. To install the barndoor, follow the steps below:
Push the spring-loaded screw (09) and at the same time lift the color frame clip (08) and flip it
backwards (see Fig. 10).
Insert the barndoor into the color frame holders (05) (see Fig. 11).
Pull the color frame clip (08) downwards to release the spring-loaded screw (09) (see Fig. 12). The
barndoor will be locked in position.
Secure the barndoor to the trussing with an appropriate secondary attachment, for example a
safety cable. See Rigging on page 13.
Note:
Make sure that the barndoor is locked in position with the color frame clip (08) before using the device.
Color Frame Installation
The ACT Fresnel 50 RGBAL is delivered with a color frame. You can insert a color gel or a diffusion filter into
the color frame. To install the color frame, follow the steps below:
Push the spring-loaded screw (09) and at the same time lift the color frame clip (08) and flip it
backwards (see Fig. 13).
Insert a color gel or a diffusion filter into the color frame (23).
Insert the color frame (23) into the color frame holders (05) (see Fig. 14).
Pull the color frame clip (08) downwards to release the spring-loaded screw (09) (see Fig. 15). The
color frame will be locked in position.
Secure the color frame to the overhead structure with an appropriate secondary attachment, for
example a safety cable. Put the safety cable through the safety eye of the color frame.
Note:
Make sure that the color frame is locked in position with the color frame clip before using the device.
Product code: 34014
Fig. 10
Fig. 13
Fig. 11
Fig. 14
15
Fig. 12
Fig. 15
Advertisement
Table of Contents
