Angle Adjustment; Beam Angle Adjustment - SHOWTEC 34014 User Manual

ACT Fresnel 50 RGBAL incl. barndoor

Angle Adjustment

You can adjust the angle of the device with the adjustment handle (03).
Turn the adjustment handle (03) counterclockwise to loosen it.
Tilt the device to the desired angle (see Fig. 08).
Turn the adjustment handle (03) clockwise to tighten it.
Note:
Make sure that the device cannot move freely after the adjustment handle (03) is tightened.

Beam Angle Adjustment

The beam angle of the ACT Fresnel 50 RGBAL can be adjusted manually in the range 14°–32°. To adjust
the beam angle, follow the steps below:
Turn the zoom control (04) counterclockwise to loosen them.
Slide the control forwards or backwards to achieve the desired beam angle (see Fig. 09).
After adjusting the beam angle, turn the zoom control (04) clockwise to tighten it. Do not overtighten
them.
Product code: 34014
14
Fig. 08
Fig. 09