Angle Adjustment; Zoom Adjustment - SHOWTEC Performer 2500 Fresnel Tungsten V1 User Manual

Performer 2500 Fresnel Tungsten

Angle Adjustment

You can adjust the angle of the device with the 2 adjustment screws (03).
01) Turn the adjustment screws (03) counterclockwise to release them.
02) Tilt the device to the desired angle (see Fig. 08).
03) Turn the adjustment screws (03) clockwise to tighten them. Make sure that the device cannot move
freely after the adjustment screws (03) are tightened.

Zoom Adjustment

You can adjust the zoom of the device with the zoom control (01).
01) Turn the zoom control (01) to set the desired zoom (see Fig. 09).
Product code: 33141
15
Fig. 08
Fig. 09