Mitsubishi Electric MELDAS C6 Programming Manual page 476

Date of revision Manual No.
Feb. 2002 BNP-B2309A
May 2004 BNP-B2309C
Dec. 2004 BNP-B2309D
Revision History
First edition created.
• The section "1. GX Developer" is revised wholly.
• The following commands were added in according to the software version D;
FROM, TO, OPEN, CLOSE, BUFSND, BUFRCV,
READ, SREAD, WRITE, SWRITE, RIRD, RIWT
• The explanations of following commands were revised.
CALL/CALLP, BMOV/BMOVP, S.DECO, ENCO/ENCOP, FF
• Number of steps for some commands such as "FF" or "××p" (with leading
edge) were changed.
• Mistakes were corrected.
• The following commands were added.
LD<=,AND<=,OR<=,LD<>,AND<>,OR<>
• The section "2.1.2 Cautions on high-speed processing programming" was
added in "2.1 PLC Processing Program Level and Operation".
• The explanation was added in "12. PLC Axis Control".
• Mistakes were corrected.
Get other manuals https://www.bkmanuals.com
Revision details