Mitsubishi Electric MELDAS C6 Programming Manual page 336

Hide thumbs Also See for MELDAS C6:

Table of Contents

Program example

(1) Even if the dedicated commands (OPEN, CLOSE, BUFSND, BUFRCV) are executed with the

high-speed PLC, the actual operation will take place at the same timing as the medium-speed

PLC. Thus, the dedicated command should be executed with the medium-speed PLC.

(2) If a connection opened with TCP is closed, and is tried to be opened again within a minute, an

error completion (completion status C017) will occur. Wait a while before opening the connection

(3) If the connection No. is not within the specified range, an error completion (completion status

C1A6) will occur, but the completion device and completion device +1 will not turn ON.

9. Exclusive Commands 1

Get other manuals https://www.bkmanuals.com