Operation; Basic Weighing Operation; Notes About Operations - AND SJ-WP Series Instruction Manual

5. Operation

5.1.

Basic Weighing Operation

1. Press the
All the symbols except the comparator LEDs are
displayed. When the weight value becomes stable,
the display turns off for a moment and displays zero
(power-on zero) with the weighing unit used last
before turning off.
2. Select a weighing unit using the MODE switch.
 Refer to "6. Selecting a Weighing
3. When the display doesn't show zero, press the
switch to set the display to zero.
4. When using a tare (container), place the container
on the weighing pan, and press the TARE
to set the display to zero.
5. Place the object to be weighed on the weighing pan
or in the container, and wait for the STABLE
indicator to turn on and read the value.
6. Remove the object from the weighing pan.
7. Press and hold the
power off.
5.2.

Notes About Operations

Power-on zero
 If the weight is unstable at power ON, the scale displays
touches the weighing pan, or check if there is strong wind or vibration.
 The range for power-on zero is within ±50% (±10% for Legal for Trade models) of the
weighing capacity (kg) at the adjusted zero point. If the scale is powered on with a
load beyond this range, the scale displays
weighing pan.
ZERO and TARE
 The (as ZERO switch) and TARE switches work when the weight value is
stable.
 The switch will zero the scale if the weight value is within ±2% of the
weighing capacity (kg) at the power-on zero point. The ZERO◄ indicator turns on.
(ZERO operation)
 The TARE switch will tare the scale and subtract the weight to zero as a tare weight
switch to turn the power ON.
Unit" for details.
switch to turn the
Container
Weighing pan
Object to
be weighed
.
switch
Press & hold
. Remove the load from the
9
Press
Power OFF
. Check anything