Command Mode - AND SJ-WP Series Instruction Manual

10.4. Command Mode

In the command mode, the scale is controlled by commands that come from an external
device such as a computer.
Command List
Command
Q Requests data be output immediately.
Z Zeros the scale when the weighing value is stable.
T Tares the scale when the weighing value is stable.
U Switches the weighing unit.
CT Clears tare
In five-level comparator mode
In three-level comparator mode : Not used
?H3
In seven-level comparator mode : Threshold value of
In five-level comparator mode
?H2 In three-level comparator mode : Not used
In seven-level comparator mode : Threshold value of
In five-level comparator mode
In three-level comparator mode : HI limit value is output.
?H1
In seven-level comparator mode : Upper threshold value
In five-level comparator mode
In three-level comparator mode : LO limit value is
?L1
In seven-level comparator mode : Threshold value of
In five-level comparator mode
?L2 In three-level comparator mode : Not used
In seven-level comparator mode : Threshold value of
In five-level comparator mode
In three-level comparator mode : Not used
?L3
In seven-level comparator mode : Threshold value of
Description
: Not used
rank 5 is output.
: HIHI limit value is
output.
rank 4 is output.
: HI limit value is output.
of rank 3 is output.
: LO limit value is
output.
output.
rank 3 is output.
: LOLO limit value is
output.
rank 2 is output.
: Not used
rank 1 is output.
22
Remarks
Same as the
ZERO key.
Same as the
TARE key.
Same as the
MODE key.
The output of
setting values for
comparator mode
*Internal setting in
comparator
comprison mode
Five-level mode:
" "
" "
Three-level
mode:
" "
" "
Seven-level
mode:
" "
" "