Basic Operation - AND HT-300CL Instruction Manual

Basic Operation

1. Press the ON:OFF key to turn the scale on. The scale displays all
segments for a few seconds and shows zero.
Press the ON:OFF key again to turn the scale off.
2. Press the MODE key to select an appropriate weighing unit.
When the key lock functions are activated, these operations cannot be

The scale will power up with the same weighing unit as the one in use

when turned off last time.
3. Verify that the reading is zero. If not, press the RE-ZERO key to zero the
display. When you use a container for weighing, place an empty
container on the weighing pan and press the RE-ZERO key to zero the
display.
4. Place objects to be weighed on the weighing pan or in the container.
Wait for the STABLE "" to be displayed and read the value.
Errors
e Overload. Remove object from the weighing pan.
- - - - - The scale is out of zero range or unstable when powered on.
lb
Low battery. Replace batteries with four new ones immediately.
1Cale Calibration error. Incorrect calibration weight.
1err # Internal errors (# shows an error number). Request service.
WEIGHING
6
made.