Counting Mode - AND SJ-WP Series Instruction Manual

7. Counting Mode

Determines a unit weight (the weight of one piece) from a known sample quantity, and
calculates how many pieces are on the weighing pan using the unit weight.
The unit weight is maintained even if the power is turned OFF.
1. Press the MODE switch to select "pcs".
("pcs" = pieces)
2. Press the SAMPLE switch to enter the
sample unit weight storing mode. The
numerical value on the left indicates the
number of samples.
3. Pressing the SAMPLE switch allows
you to change the number of samples in
the order

 
• By pressing the MODE switch when
is displayed, the scale exits the
sample unit weight storing mode to the
count display.
4. When "-" appears at the right side of the
number of samples, press the
switch to zero the scale.
If necessary, place a container on the
weighing pan, and press the TARE
switch. Confirm that the right side of the
number of samples shows zero.
5. Place the correct number of samples on
the. weighing pan or in the container.
6. Confirm that the STABLE indicator is
turned on. Press the MODE switch to
calculate and store the unit weight.
Remove the samples. The scale is set to
count objects with this unit weight.
 The total weight of samples should be
more than shown below, regardless of
the number of samples.
SJ-3000WP/-BT: 2.5 g
SJ-6000WP/-BT: 5 g
SJ-15KWP/-BT:
SJ-30KWP/-BT:
If not, the display shows
returns to the display of step 5.
Increase the number of samples (step
3) and try again.
7. Place the objects to be counted on the
weighing pan.
  
.
12.5 g
25 g
Container
Weighing pan
Samples
and
12
Press
Number of
Press
Press
Confirm
Press
Press
samples
zero