Counting Mode - AND SJ-3000WP/-BT Instruction Manual

Determines a unit weight (the weight of one piece) from a known sample quantity, and
calculates how many pieces are on the weighing pan using the unit weight.
The unit weight is maintained even if the power is turned OFF.
1. Press the
MODE
2. Press the
SAMPLE
unit weight storing mode. The numerical value on
the left indicates the number of samples.
3. Pressing the
the number of samples in the order 5  10  20 
50  100  ESC  5.

By pressing the
displayed, the scale exits the sample unit weight
storing mode to the count display.
4. When " " appears at the right side of the number
-
of samples, press the
scale.
If necessary, place a container on the weighing
pan, and press the
the right side of the number of samples shows
zero.
5 Place the correct number of samples on the.
weighing pan or in the container.
6. Confirm that the STABLE indicator is turned on.
Press the
MODE
the unit weight. Remove the samples. The scale
is set to count objects with this unit weight.
The total weight of samples should be more than

shown below, regardless of the number of samples.
SJ-3000WP/-BT: 2.5 g
SJ-6000WP/-BT: 5 g
SJ-15KWP/-BT: 12.5 g
SJ-30KWP/-BT: 25 g
If not, the display shows
the display of step 5. Increase the number of
samples (step 3) and try again.
7. Place the objects to be counted on the weighing
pan.

7. COUNTING MODE

switch to select "pcs".("pcs" = pieces)
switch to enter the sample
switch allows you to change
SAMPLE
switch when
MODE
switch to zero the
switch. Confirm that
TARE
switch to calculate and store
and returns to
STABLE
ZERO
STABLE
ZERO
is
STABLE
ZERO
Container
Weighing pan
STABLE
ZERO
Samples
STABLE
ZERO
STABLE
ZERO
STABLE
ZERO
10
Press
NET
Press
NET
Press
NET
Press
NET
NET
Press
NET
NET
Number of
samples
Confirm
zero