Counting Mode (Pcs) - AND EK-610j Instruction Manual

www.balances.com in an Authorized A&D Dealer

5-6. Counting mode (pcs)

Determines the number of objects in a sample. Calculates the reading, using the basic
sample unit weight, and determines how many pieces are contained.
Selecting the counting mode
1. Press the MODE key to select
Storing the sample unit
2. Press the SAMPLE key to enter the sample
unit weight storing mode.
3. To select the number of samples, press the
1SAMPLE key. It may be set to 5, 10, 25, 50,
or 100.
4. Place a tare container on the weighing pan, and
press the
side of the number of samples shows zero.
5. Place the number of samples specified on the
pan. In this example, 25 pieces.
6. Press the ENTER key to calculate and store
the unit weight. Remove the sample. The balance
is set to count objects with this unit weight.
Counting the objects
7. Place the objects to be counted on the pan.
Counting mode using the ACAI function
TM
ACAI (Automatic Counting Accuracy Improvement)
is a function that improves the accuracy of the unit
weight by increasing the number of samples as the
counting process proceeds.
8. If a few more samples are added, the ACAI mark
is displayed. (To prevent an error, add three or
more. The ACAI mark will not be displayed if
overloaded.)
Visit www.scaleman.com to order A&D Weighing balances at discount prices
TARE key. Confirm that the right
.
( :pieces)
ZERO
8
0
10 -
Each pressing
switches the
number of
samples.
25 -
Container
Weighing pan
Confirm the display
25 0
Samples
(25 pcs)
To store
25
ACAI mark
ACAI
25