Connection Warning; Operation - PROLiNK Professional II+ Series User Manual

1-4. Connection Warning

• There is no standard feedback protection inside, please make sure the UPS has been isolated with
safe before installation. The UPS isolation device must be able to carry current to the UPS input.
•
UPS must be connected to the TN grounding system.
•
The power supply for this unit must be 3 phase according to the type of UPS unit and must be
connected to
Grounding
•
Use of this equipment in life support applications where this equipment fails
It is estimated that it can cause the failure of life support equipment or significantly
affecting its safety or effectiveness is not recommended. Do not use this equipment in
front of a mixture of flammable anesthesia with air, oxygen or nitrous oxide.
•
Connect your UPS power module's grounding terminal to a grounding electrode conductor. Connect
grounding terminal module of your UPS module to the earthing electrode conductor
•
The UPS is connected to a DC energy source (battery). Terminal output may turn on when the UPS is
not connected to AC supply

1-5. Operation

Do not occasionally disconnect conductor grounding cables on UPS or building wiring terminals as this will
eliminate the protection of the UPS system and all connected loads.
The UPS system has its own internal source (battery). The UPS output socket or output terminal block may
have electricity even if the UPS system is not connected to the building's wiring outlet.
To completely disconnect the UPS system, first press the "OFF" button and then disconnect the electrical
connection.
Make sure no liquids or other foreign matter can enter the UPS system.
UPS can be operated by any individual with no prior experience.
Before working on this circuit
- Isolate Uninterruptible Power System (UPS)
- Then check the dangerous voltage between
All terminals include gronding shields.
Backcurrent voltage risk
2