Checklist For The Installation Of The Webasto Charge Station - Webasto TurboConnect Quick Start Manual

Ev charge station
Table of Contents

Advertisement

23

Checklist for the installation of the Webasto charge station

Please complete the TurboConnect Charge Station commissioning report.
Serial number:
Material number:
240 V (residential split phase)
Voltage
208 V (industrial)
General preconditions:
Installation, electrical connection, and initial operation of the charge station have
been carried out by a qualified electrician.
The charge station has been inspected for visual damage before installation and use.
Local installation conditions:
The charge station has not been installed in an explosion-sensitive area (Ex Zone).
To achieve optimal performance of the charge station, areas with direct sunlight have
been avoided.
The charge station has been installed in a location where falling objects cannot
damage the charge station.
The location of the charge station has been selected in such a way that vehicles
cannot inadvertently collide with it.
The legal requirements for electrical installations, fire protection, safety regulations,
and escape routes have been met.
Ensure that the EVSE is installed in a dedicated supply circuit with a non-GFCI two-
pole circuit breaker, in accordance with local codes and ordinances.
The charging cable does not obstruct any passageways.
The charging cable and coupling have been protected against coming into contact
with external heat sources, water, dirt, and chemicals.
The charging cable and coupling have been protected against being driven over,
trapped, or any other mechanical hazards.
Charge station installation requirements:
Tools and installation materials have been removed from the charge station before
closing the cover.
A suitable charging cable (single phase) has been installed in the charge station (as
per the type label) during installation.
The charging cable has been connected as per installation instructions.
The customer has been instructed on how to use the charge station correctly.
The installer has checked the correct operation of the charge station using an EV
simulator / tester.
Customer / client:
Electrician / contractor:
Webasto TurboConnect
Date
Date
EN
23

Advertisement

Table of Contents
loading

Table of Contents