3.3 XPOSE 2.0 Operation
Note: The following XPOSE 2.0 operation takes D8 PLUS as an example, D8 (HDMI 2.1) and D8 (DP 1.4)
operate the same except for the difference of input interface.
3.3.1 Login in XPOSE
Double click this icon
interface shown in the right:
The initial language of XPOSE 2.0 is self adjusted
based on the operation system language of the
computer.
If you want to change language, just click Language
and choose one you need.
Then click Start to run XPOSE.
After login,the interface is shown in the right.
Users can find 5 major parts : System Setting, Connect, Display, Layer, Scenes.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
, and enter the log on
30