RGBlink D8 User Manual page 22

Check values set, then click " Apply" > "Confirm".
Complete EDID settings on D8, then set resolution on the signal source (such as a computer) to be same as the D8.
If you set EDID on D8 to 7000x4000@60, the steps to set the resolution on a computer are as follows:
● Step 1: Set the resolution on graphics card. Taking NVIDIA as an example: Right-click on the desktop, then
select "NVIDIA Control Panel".
● Step 2: Click "Display" > "Change Resolution".
- Firstly, check if 7000x4000@60 can be found in the drop-down list. Select this resolution directly if there
is 7000x4000@60 without needs to follow Step 3 to Step 5 to customize resolution.
- If 7000x4000@60 cannot be found, please click "Customize" and then follow Step 3 to Step 5 for
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
21