Table of Contents
Advertisement
Template
There are 8 types of basic "Display Area", which is
used to contain output interface, and could be regarded
as layout of output.
Drag a template to create a container in other word a
display area.
Resolution
Users can choose output resolution as shown in the figure.
Mode
Each mode is marked in different color and provided
with fitted templates. Users can do operations under
different modes.
D8 supports Split Mode.
No container is reserved after change of resolution
under Split Mode, that is, you need to recreate a
container.
Customize Container
Click
at the bottom of template list.
Monitor Layout: Auto or Manual
Steps of create container are as follows:
1. Fill in H Total/V Total and Row/Column ,it will
calculate H item and V item automatically.
For example, if you would like to create a container
with 1 row and 4 columns and each display has a
height of 1080, width of the first container is 1920,
the second container is 1680, the third container is
1600 and the fourth container is 2480. The total width
will be 7680 and the total height will be 1080.
2. Click <Create>, the container will display in the
interface, and shows the width and height of each
Display.
3. Click<Save> to save the container.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
39
Advertisement
Table of Contents
