Users can do Layer Scaling and Cropping.
Type horizontal position,Vertical position, Width and Height as needed. Then click "Save Settings" > "Confirm"
to save above parameters.
3.1.2.5 Factory Reset
Back to <Settings>, then click <Factory Reset> to enter following interface.
Performing a factory reset will delete all user data and personalized settings on the device and return it to its
initial state.
Notice: All parameters will be restored to default parameters, which include but not limited to device IP, EDID,
preset scenes, etc.
3.1.3 Load Presets
Back to main interface, then click <Load> to load presets.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
24