Table of Contents
Advertisement
How to Load the Saved Parameter
1. Push the[LOAD/PIP2] button, the button light is on, and enable the LOAD function.
2. Turn the knob, and choose the position that will load, push the knob to confirm.
User can also push the [MENU/EFFECT] button to enter to the menu items, turn the knob to choose
<SAVE SETUP>, and choose <LOAD FROM> to load the saved parameter.
3. Push the [LOAD/PIP2] button again, the button light if off, and disable the LOAD function.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
LOAD FROM
>SAVE 1
Button on is ready for recall
Button flashes means just recall
24
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn
Advertisement
Table of Contents
