Table of Contents
Advertisement
Figure 108. Hot-swap HDD cable connection: 3.5-inch, ServeRAID SAS/SATA controller installed on the right side
Figure 109. Hot-swap HDD cable connection: 3.5-inch, ServeRAID SAS/SATA controller installed on the left side
Simple-swap HDD cable connection: ServeRAID SAS/SATA controller and fixed
power supply
•
: Connect to the backplane power connector on the system board and the power connector on the
1
hard-disk-drive backplate assembly.
•
: Connect to the connector 0 on the ServeRAID SAS/SATA controller and the four connectors on the
2
hard-disk-drive backplate assembly.
Notes:
• The Mini-SAS cable has been installed to the hard-disk-drive backplate assembly by default.
Lenovo System x3250 M6 Installation and Service Guide
162
Advertisement
Table of Contents
Troubleshooting
