Lenovo 3633 Installation And Service Manual page 136

Figure 55. Front I/O assembly installation
Step 2. Reconnect the USB cable and the operator information panel cable to the connectors on the
system board. Make sure the relevant cables pass through the cable clips.
Step 3. Complete the parts replacement. See
Removing the operating temperature enhancement kit
To remove the operating temperature enhancement kit, do the following:
Step 1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2. Remove the server cover. See
Step 3. Remove the PCI riser-card assembly. See
Step 4. Disconnect the operating temperature enhancement kit connector from the system board.
Figure 56. Operating temperature enhancement kit cable disconnection for 2.5-inch-drive model
Lenovo System x3250 M6 Installation and Service Guide
122
"Completing the parts replacement" on page
"Removing the server cover" on page
"Removing the PCI riser-card assembly" on page
168.
92.
96.