Table of Contents
Advertisement
Figure 21. Security bezel installation
Step 3.
Use the key to lock the security bezel to the closed position.
Figure 22. Locking the security bezel
Removing the PCI riser-card assembly
To remove the PCI riser-card assembly, do the following:
Step 1.
Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2.
Remove the server cover. See
Step 3.
Grasp the blue tabs on the PCI riser-card assembly and lift the PCI riser-card assembly to release it
from the chassis.
Lenovo System x3250 M6 Installation and Service Guide
96
"Removing the server cover" on page
92.
Advertisement
Table of Contents
Troubleshooting
