Preparation For Optional Bench Mounting Kit - Unitech MR350 MKII Technical Reference Manual

8.1.2. Preparation for optional bench mounting kit

(If you are not using the bench mounting kit to mount the terminal,
you may go directly to the next section.)
For attaching the bench mounting kit to the MR350MKII, please
refer to "Installing desktop/bench mounting handle" on page 2-31.
Installation procedure:
1) Determine whether the top-part or bottom-part of the MR350MKII
? backplate will be used for attaching the bench mounting kit.
2) Select a location for the terminal which will allow convenient user
operation. Make sure there is enough room to mount the terminal
and easily remove it for maintenance.
3) Select the type of fasteners (such as wood screws, expanding plastic
anchor in conjunction with machine screws and so on) to be used,
depending on the type of material to which the terminal be mounted.
8-77