List Directory Of Ram Disc; Terminal Emulation Mode; User Configuration Mode (Set Command) - Unitech MR350 MKII Technical Reference Manual

the LCD. You may use the [ ] key to toggle the selection of the program, and press
[E] to execute the selected program. The executed program can be aborted by
pressing [SHIFT] in conjunction with [F5/*] if necessary.
6.7.

List Directory of RAM Disc.

Press "DIR" in Ready prompt or select 5) DIR in the user command menu. The
system will display every two files and pause, user may press any key to continue to
display next two files. For example, if only one file ? OINT.EXE" is stored in the
RAM disc, the display will show as below:
POINT.EXE
<<END>>
Press any key to return to the Ready prompt.
6.8.

Terminal Emulation Mode

The MR350MKII provides a built-in terminal emulation utility. You may use this
utility to accept data input from the scanner port, build-in reader port or keyboard,
and send the data to the host through the host port. The communication protocol
corresponds with the settings of the host port.
Press "TER" at the Ready prompt or select 8) TER in the user command menu to
invoke the terminal emulation utility. The display will be as below and the terminal
will be ready to accept data.
?
Press [F5/*] in conjunction with [SHIFT] to abort the terminal emulation utility and
go back to the Ready prompt.
6.9.

User Configuration Mode (SET command)

The operator may alter the system calendar/clock, and buzzer volume and turn the
backlight on/off to fit their operation environment. Type "SET" in Ready mode or
select item 7) in the user command menu to enter the Configuration mode.
There are 3 setup procedures which will be shown in sequence.
Setting the system calendar/clock.
Selecting speaker volume as HIGH, MEDIUM, or LOW.
Selecting LCD backlight or cursor as ON or OFF .
Set Keypad input status
6-63