System Commands; Erase File; Run Mode - Unitech MR350 MKII Technical Reference Manual

MR350MKII V X.XX
>
Figure 6-1 Ready mode prompt
6.4.

System Commands

In Ready mode, the user may invoke system commands by inputting a
three-character command including "ERA", "RUN", "TER", "COM", "TYP",
"DIR" and "SET". Or by pressing [F5/*] to invoke the user command menu.
Command
ERA
RUN
TER
COM
TYP
DIR
SET
6.5.

Erase File

To remove the file from the RAM disc, you may type "ERA" at the Ready prompt or
select 6) ERA in user command menu. The display will show available files name on
screen, user can use [ ] or [ ] key to choice destination file name and [E] key to
delete it.
PRESS FILENAME:
xxxx.xxx
Type the filename you intend to remove including the file extension name.
? ?
NOTE:
Once the file is erased, you are unable to recover the file.
6.6.

Run Mode

Users may enter the filename of a program to execute the program directly. Users
may select item 1) in the user command menu or enter the "RUN" command to enter
Run mode, the file names of the .EXE files stored in the RAM Disk will be shown on
Description
Erase (delete) a file from RAM disk
Run a selected program
Enter terminal mode to emulate the MR350MKII as a dump
terminal
Enter Kermit server mode
Dump file contents to LCD
List directory of RAM disk
Enter user configuration mode to set the system date and
time, buzzer volume and backlit on/off
6-62