File Transfer Mode - Unitech MR350 MKII Technical Reference Manual

6.10. File Transfer Mode

The terminal provides a built-in file transfer utility which uses Kermit protocol.
When the host port is assigned to serve through the built-in file transfer utility, the
download/upload communication can be made through a built-in Kermit server in
the MR350MKII system. The physical RS-232 or RS-422/485 port is selected as the
device setting in the supervisor mode. The operator may set the terminal to Kermit
server mode by typing "COM" in Ready mode or by selecting item 3) in the user
command menu. The following screen will be shown when entering Kermit server
mode:
SERVER MODE
Then the operator should run Kermit communication software on the Host PC. The
proper communication parameters should also be defined in the Kermit parameter
file, i.e. mskermit.ini. When using Kermit server mode to download a file, the cable
for linking the Terminal and Host must have the CTS and RTS wires connected.
After file transfer in Kermit server mode, press [SHIFT] in conjunction with [F5/*]
to return to Ready mode.
6-65