PROLiNK Master II Series User Manual page 25

Ø
CALI: After clicking "CALI", a message board will appear as shown in the screen above. Touch "YES" to
return the default calibration value. Touch "Back" or "No" to cancel this operation and return to the
START menu page.
Ø
EEPROM: After clicking "EEMPROM", a message board will appear as shown in the screen above.
Touch "YES" to clear all setting values in EEPROM . Touch "Back" or "No" to cancel this operation and
return to the START menu page.
Ø
TOUCH CALI: After pressing the confirmation window, it will appear as shown in the screen above.
Touch screen to recalibrate. Then, a blue screen appears and please click the place of the cross with
your mouse.
INITIAL CALI Pageà
INITIAL EEPROM Pageà
INITIAL TOUCHES OF àCALI
23